- white space cleanup part 2 this time 1.4 ;)

i hope it helps with merging stuff back to 1.5 git-svn-id: svn://svn.lighttpd.net/lighttpd/branches/lighttpd-1.4.x@1371 152afb58-edef-0310-8abb-c4023f1b3aa9
16 years ago · 8cd1471cb3
163 changed files with 9153 additions and 9153 deletions
--- a/20
+++ b/20
@ -17,15 +17,15 @@ modification, are permitted provided that the following conditions are met:
  be used to endorse or promote products derived from this software without
  specific prior written permission.

-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 THE POSSIBILITY OF SUCH DAMAGE.

--- a/1516
+++ b/1516
--- a/2
+++ b/2
@ -10,7 +10,7 @@ Installation
 Installation
 ------------

-Get the source from 
+Get the source from

 http://www.lighttpd.net/download/

--- a/Makefile.am
+++ b/Makefile.am
@ -1,3 +1,3 @@
 SUBDIRS=src doc tests cygwin openwrt

-EXTRA_DIST=lighttpd.spec 
+EXTRA_DIST=lighttpd.spec
--- a/72
+++ b/72
@ -32,40 +32,40 @@ NEWS
  * fixed required trailing newline in configfiles (#142)
  * fixed quoting the autoconf files (#466)
  * fixed empty Host: + $HTTP["host"] handling (#458)
-  * fixed handling of If-Modified-Since if ETag is not set 
+  * fixed handling of If-Modified-Since if ETag is not set
  * fixed default-shell if SHELL is not set (#441)
  * fixed appending and assigning of env.* vars
  * fixed empty FCGI_STDERR packets
-  * fixed conditional server.allow-http-11 
+  * fixed conditional server.allow-http-11
  * fixed handling of follow-symlink + lstat()
  * fixed SIGHUP handling if max-workers is used
  * fixed "Software caused connection abort" messages on FreeBSD

 - 1.4.11 - 2006-03-09

-  * added ability to specify which ip address spawn-fci listens on 
+  * added ability to specify which ip address spawn-fci listens on
    (agkr@pobox.com)
  * added mod_flv_streaming to streaming Flash Movies efficiently
-  * fixed handling of error codes returned by mod_dav_svn behing a 
+  * fixed handling of error codes returned by mod_dav_svn behing a
    mod_proxy
  * fixed error-messages in mod_auth and mod_fastcgi
  * fixed re-enabling overloaded local fastcgi backends
  * fixed handling of deleted files in linux-sendfile
  * fixed compilation on BSD and MacOSX
  * fixed $SERVER["socket"] on a already bound socket
-  * fixed local source retrieval on windows 
+  * fixed local source retrieval on windows
    (secunia)
-  * fixed hanging cgi if remote side is dieing while reading 
+  * fixed hanging cgi if remote side is dieing while reading
    from the pipe (sandy@meebo.com)

 - 1.4.10 - 2006-02-08

  * added docs for mod_dirlisting
  * added fastcgi.map-extensions to mod_fastcgi
-  * fixed load balancing for mod_fastcgi 
+  * fixed load balancing for mod_fastcgi
  * fixed extra newline for syslog() in mod_accesslog
  * fixed user-track cookie for IE in mod_usertrack
-  * fixed crash in digest handling in mod_auth 
+  * fixed crash in digest handling in mod_auth
  * fixed handling of 301 response-bodies from a mod_proxy backend
  * fixed loading of base modules if server.modules is not set
  * fixed broken cgi if mod_scgi is loaded
@ -97,15 +97,15 @@ NEWS

  * added auto-reconnect to ldap-server in mod_auth
    (joerg@netbsd.org)
-  * changed auth.ldap-cafile to be optional 
+  * changed auth.ldap-cafile to be optional
    (joerg@netbsd.org)
  * added strip_request_uri in mod_fastcgi
  * added more X-* headers to mod_proxy
    (Ben Grimm <bengrimm@gmail.com>)
-  * added 'debug' to simple-vhost to suppress the 
+  * added 'debug' to simple-vhost to suppress the
    (mod_simple_vhost.c.157) No such file or directory /servers/ww.lighttpd.net/pages/
    messages by default
-  * added support to let the server listen on UNIX-socket 
+  * added support to let the server listen on UNIX-socket
  * changed default stat-cache-engine to 'simple'
  * removed debian/ dir from source package on request by packager
  * fixed max-age timestamps in mod_expire
@ -113,12 +113,12 @@ NEWS
  * fixed range request handling in network_writev
  * fixed retry on connect error in mod_fastcgi
    (Robert G. Jakabosky <bobby@alphatrade.com>)
-  * fixed possible crash in mod_webdav if sqlite3 support 
+  * fixed possible crash in mod_webdav if sqlite3 support
    is available but not use
  * fixed fdvent-handler init if server.max-worker was used
    (Siddharth Vijayakrishnan <mail@bluefireworks.net>)
  * fixed missing cleanup in mysql_vhost
-  * fixed assert() in "connections.c:962: 
+  * fixed assert() in "connections.c:962:
      connection_handle_read_state: Assertion 'c->mem->used' failed."
  * fixed 64bit issue in md5
  * fixed crash in mod_status
@ -137,13 +137,13 @@ NEWS
  * added madvise() to instruct the kernel the do proper read-ahead in network_writev
  * added support for %I in mod_accesslog
  * added better compat to Apache for ?auto in mod_status
-  * added support for userdirs without a entry in /etc/passwd in mod_userdir 
+  * added support for userdirs without a entry in /etc/passwd in mod_userdir
    (rob@inversepath.com)
  * added startup-time selectable network-backend
  * added location of upload-files to config as array
  * added webdav.log-xml for logging xml-content in mod_webdav
  * added Cache-Control: max-age to mod_expire
-  * workaround missing client-bug by assuming we received a close-notify on 
+  * workaround missing client-bug by assuming we received a close-notify on
    non-keep-alive requests in SSL request
  * disabled kerberos5 support by default to fix compilation on RHEL
  * fixed order of library checks to fix compilation on Solaris 9
@ -194,10 +194,10 @@ NEWS
 - 1.4.3 - 2005-09-01

  * added gracefull shutdown
-  * added server.max-connections 
+  * added server.max-connections
  * fixed compilation on all BSD platforms
  * fixed init of kqueue and /dev/poll after daemonize
-  * fixed segfault if select() is event-handler and more than FD_SETSIZE 
+  * fixed segfault if select() is event-handler and more than FD_SETSIZE
    fds are opened
  * fixed compilation of mod_cml
  * fixed bin-copy-env in mod_fastcgi
@ -217,13 +217,13 @@ NEWS
  * added a complete Class 1 complient mod_webdav
  * fixed ssl support (especially on OpenBSD)
  * fixed response header in body problem in mod_cgi
-  * fixed numbers before body problem 
+  * fixed numbers before body problem
  * fixed compilation on Solaris and FreeBSD
  * fixed conditional options in mod_dirlisting
  * fixed segfault in mod_dirlisting for NFS directories
  * fixed check for docroot in change-root environments

- 1.4.0 - 2005-08-17 
+- 1.4.0 - 2005-08-17

  * added nested conditionals
  * added remote-ip to $HTTP
@ -239,7 +239,7 @@ NEWS
  * added support for accesslog to syslog
  * added support for PATH_INFO guessing if check-local is disabled in
      mod_fastcgi
-  * added switch to disable range-requests 
+  * added switch to disable range-requests
  * added valid-user option for mod_auth (tigger at gentoo.org)
  * added JavaScript based sorting to mod_status (erik)
  * added selective TCP_CORK (Christian von Roques)
@ -252,7 +252,7 @@ NEWS

 - 1.3.15 - 2005-07-15

-  * added mod_cml 
+  * added mod_cml
  * added mod_trigger_b4_dl
  * added encoding to mod_dirlisting
  * added ?auto to mod_status
@ -295,7 +295,7 @@ NEWS
  * added REMOTE_PORT and SERVER_ADDR to CGI-env
  * relaxed handling of newlines before keep-alive requests
  * relaxed uri-parser again
-  * fixed PHP_SELF for php 
+  * fixed PHP_SELF for php
  * fixed compilation on MacOS X
  * fixed handling of EPIPE and ECONNRESET
  * fixed crash in mod_auth if config-options are missing
@ -309,7 +309,7 @@ NEWS
  * added support for full commandline in spawn-fcgi
  * fixed missing check for IP-address in mod_fastcgi
  * fixed compile error with openssl in mod_fastcgi
-  * removed a debug-message from network-functions 
+  * removed a debug-message from network-functions

 - 1.3.9 - 2005-02-06

@ -321,9 +321,9 @@ NEWS
  * fixed min-procs and max-procs in FastCGI on PowerPC
  * fixed crash in setenv.add-response-header
  * fixed handling of nph-scripts in CGI
-  * fixed accidently sending out physical file in CGI on error 
+  * fixed accidently sending out physical file in CGI on error
  * fixed cygwin support
-  * fixed handling of missing files 
+  * fixed handling of missing files
  * fixed HEAD requests for dynamic requests

 - 1.3.8 - 2005-01-30
@ -338,22 +338,22 @@ NEWS
  * fixed build problems on netbsd 1.4.x and 1.5.x
  * fixed status.url configuration
  * fixed handling of != and !~ in configutation
-  * fixed special cases in keep-alive handling 
+  * fixed special cases in keep-alive handling
  * fixed timeout handling in handling POST requests
-  * fixed mode AUTHORIZER in FastCGI 
+  * fixed mode AUTHORIZER in FastCGI
  * fixed handling if internal redirects if no Host: is supplied
-  * fixed mod_alias + pathinfo 
+  * fixed mod_alias + pathinfo
  * fixed directory indexes and permissions
  * enabled sending errorlog to syslog again

 - 1.3.7 - 2004-12-11

-  * added retries for a fastcgi connect if a php-childs 
+  * added retries for a fastcgi connect if a php-childs
    dies at startup
  * update the debian directory
  * added setgroups() to drop all group-privs
  * added native port to windows via mingw32
-  * added server.tag = '...' 
+  * added server.tag = '...'
  * added support for ${...} in mod_ssi
  * ported all plugins to conditional support
  * fixed multipart handling in cgi
@ -367,10 +367,10 @@ NEWS
 - 1.3.6 - 2004-11-03

  * added spawn-fcgi to the distribution
-  * added support in fastcgi module to spawn fastcgi 
+  * added support in fastcgi module to spawn fastcgi
    processes itself
  * fixed logfile cycling if external logging is used
-  * fixed connection handling in fastcgi if no chunk 
+  * fixed connection handling in fastcgi if no chunk
    encoding is used
  * fixed internal redirects on directories if a query
    string is supplied
@ -379,7 +379,7 @@ NEWS

 - 1.3.5 - 2004-10-31

-  * added mod_alias 
+  * added mod_alias
  * added mod_userdir
  * added the exec command to the SSI handler
  * added a switch to disable follow-symlinks
@ -395,12 +395,12 @@ NEWS
  * added build target for OpenWRT
  * added plain backend support for auth-digest
  * fixed handling the external accesslog processes
-  * fixed SERVER_NAME in CGI and FastCGI 
+  * fixed SERVER_NAME in CGI and FastCGI

 - 1.3.3 - 2004-10-16

  * added support for NL terminators in CGI-scripts
-  * added support for conditionals in mod_auth, 
+  * added support for conditionals in mod_auth,
    mod_simple_vhost and mod_evhost
  * added a error-handler for 404 codes
  * fixed request counter in the rrdtool module
@ -504,7 +504,7 @@ NEWS
 - 1.2.0 - 2004-05-17

  * added conforming Expect: handling
-  * added a module for secure and fast downloading 
+  * added a module for secure and fast downloading
  * rewrote the event handling interface
  * fixed array handling which might lead to 'missing header'
  * fixed pipelining support
--- a/24
+++ b/24
@ -12,7 +12,7 @@ a light httpd
 :Revision: $Revision: 1.8 $

 :abstract:
-  lighttpd a secure, fast, compliant and very flexible web-server 
+  lighttpd a secure, fast, compliant and very flexible web-server
  which has been optimized for high-performance environments. It has a very
  low memory footprint compared to other webservers and takes care of cpu-load.
  Its advanced feature-set (FastCGI, CGI, Auth, Output-Compression,
@ -22,7 +22,7 @@ a light httpd
 the naming
 ----------

-lighttpd is a __httpd__ which is 
+lighttpd is a __httpd__ which is

 - fast as __light__ning and
 - __light__ when it comes to memory consumption and system requirements
@ -50,7 +50,7 @@ Advanced Features
 - load-balanced FastCGI
  (one webserver distributes requests to multiple PHP-servers via FastCGI)
 - custom error pages (for Response-Code 400-599)
- virtual hosts 
+- virtual hosts
 - directory listings
 - streaming CGI and FastCGI
 - URL-Rewriting
@ -71,18 +71,18 @@ PHP-Support
 - includes a utility to spawn FastCGI processes (necessary for PHP 4.3.x)

 Security features
-````````````````` 
+`````````````````

 - chroot(), set UID, set GID
 - protecting docroot

 HTTP/1.1 features
-````````````````` 
+`````````````````

 - Ranges (start-end, start-, -end, multiple ranges)
 - HTTP/1.0 Keep-Alive + HTTP/1.1 persistent Connections
 - methods: GET, HEAD, POST
- Last-Modified + If-Modified handling 
+- Last-Modified + If-Modified handling
 - sends Content-Length if possible
 - sends Transfer-Encoding: chunk, if Content-Length is not possible
 - sends Content-Type
@ -91,7 +91,7 @@ HTTP/1.1 features
  (http://www.ietf.org/rfc/rfc2617.txt)

 HTTP/1.1 compliance
-``````````````````` 
+```````````````````

 - Sends 206 for Range Requests
 - Sends 304 for If-Modified Requests
@ -101,7 +101,7 @@ HTTP/1.1 compliance
 - Sends 416 for "out-of-range" on Range: Header
 - Sends 501 for request-method != (GET|POST|HEAD)
 - Sends 505 for protocol != HTTP/1.0 or HTTP/1.1
- Sends Date: on every requests 
+- Sends Date: on every requests

 Intended Audience
 -----------------
@ -118,14 +118,14 @@ It has been tested to work with

 - IE 6.0
 - Mozilla 1.x
- Konqueror 3.1 
+- Konqueror 3.1
  (for Keep-Alive/Persistent Connections, Accept-Encoding for PHP + gzip)
- wget 
+- wget
  (for Resuming)
 - acrobat plugin
  (for multiple ranges)
-  
-  
+
+
 Works on
 --------

--- a/54
+++ b/54
@ -10,7 +10,7 @@ version = '1.4.13'
 def checkCHeaders(autoconf, hdrs):
 	p = re.compile('[^A-Z0-9]')
 	for hdr in hdrs:
-		if not hdr: 
+		if not hdr:
 			continue
 		_hdr = Split(hdr)
 		if autoconf.CheckCHeader(_hdr):
@ -116,26 +116,26 @@ if 1:
 	autoconf = Configure(env, custom_tests = {'CheckStructMember': checkStructMember })
 	autoconf.headerfile = "foo.h"
 	checkCHeaders(autoconf, string.split("""
-			arpa/inet.h 
-			fcntl.h 
-			netinet/in.h 
-			sys/types.h netinet/in.h 
-			stdlib.h 
+			arpa/inet.h
+			fcntl.h
+			netinet/in.h
+			sys/types.h netinet/in.h
+			stdlib.h
 			string.h
 			sys/socket.h
 			sys/types.h sys/socket.h
-		 	sys/time.h 
-			unistd.h 
-			sys/sendfile.h 
-			sys/uio.h 
-			sys/types.h sys/uio.h 
-			getopt.h 
-			sys/epoll.h 
-			sys/select.h 
-			sys/types.h sys/select.h 
-			poll.h 
+		 	sys/time.h
+			unistd.h
+			sys/sendfile.h
+			sys/uio.h
+			sys/types.h sys/uio.h
+			getopt.h
+			sys/epoll.h
+			sys/select.h
+			sys/types.h sys/select.h
+			poll.h
 			sys/poll.h
-			sys/devpoll.h 
+			sys/devpoll.h
 			sys/filio.h
 			sys/mman.h
 			sys/types.h sys/mman.h
@ -147,11 +147,11 @@ if 1:
 			sys/syslimits.h
 			sys/resource.h
 			sys/time.h sys/types.h sys/resource.h
-			sys/un.h 
-			sys/types.h sys/un.h 
-			syslog.h 
-			stdint.h 
-			inttypes.h 
+			sys/un.h
+			sys/types.h sys/un.h
+			syslog.h
+			stdint.h
+			inttypes.h
 			sys/prctl.h
 			sys/wait.h""", "\n"))

@ -163,7 +163,7 @@ if 1:

 	checkTypes(autoconf, Split('pid_t size_t off_t'))

-	autoconf.env.Append( LIBSQLITE3 = '', LIBXML2 = '', LIBMYSQL = '', LIBZ = '', 
+	autoconf.env.Append( LIBSQLITE3 = '', LIBXML2 = '', LIBMYSQL = '', LIBZ = '',
 		LIBBZ2 = '', LIBCRYPT = '', LIBMEMCACHE = '', LIBFCGI = '', LIBPCRE = '',
 		LIBLDAP = '', LIBLBER = '', LIBLUA = '', LIBLUALIB = '', LIBDL = '')

@ -233,7 +233,7 @@ if 1:
 		env.Append(LIBLUA = lualibs)
 		env.Append(CPPFLAGS = [ '-DHAVE_LUA_H' ])
 		env['LIBS'] = oldlibs
-	
+

 if env['with_pcre']:
 	pcre_config = checkProgram(env, 'pcre', 'pcre-config')
@ -243,7 +243,7 @@ if env['with_pcre']:
 if env['with_xml']:
 	xml2_config = checkProgram(env, 'xml', 'xml2-config')
 	oldlib = env['LIBS']
-	env['LIBS'] = [] 
+	env['LIBS'] = []
 	env.ParseConfig(xml2_config + ' --cflags --libs')
 	env.Append(CPPFLAGS = [ '-DHAVE_LIBXML_H', '-DHAVE_LIBXML2' ], LIBXML2 = env['LIBS'])
 	env['LIBS'] = oldlib
@ -251,7 +251,7 @@ if env['with_xml']:
 if env['with_mysql']:
 	mysql_config = checkProgram(env, 'mysql', 'mysql_config')
 	oldlib = env['LIBS']
-	env['LIBS'] = [] 
+	env['LIBS'] = []
 	env.ParseConfig(mysql_config + ' --cflags --libs')
 	env.Append(CPPFLAGS = [ '-DHAVE_MYSQL_H', '-DHAVE_LIBMYSQL' ], LIBMYSQL = 'mysqlclient')
 	env['LIBS'] = oldlib
@ -265,7 +265,7 @@ else:

 versions = string.split(version, '.')
 version_id = int(versions[0]) << 16 | int(versions[1]) << 8 | int(versions[2])
-env.Append(CPPFLAGS = [ 
+env.Append(CPPFLAGS = [
 		'-DLIGHTTPD_VERSION_ID=' + str(version_id),
 		'-DPACKAGE_NAME=\\"' + package + '\\"',
 		'-DPACKAGE_VERSION=\\"' + version + '\\"',
--- a/configure.in
+++ b/configure.in
@ -40,13 +40,13 @@ dnl more automake stuff
 AM_C_PROTOTYPES

 dnl libtool
-AC_DISABLE_STATIC	
+AC_DISABLE_STATIC
 AC_ENABLE_SHARED

 AC_LIBTOOL_DLOPEN
 AC_PROG_LIBTOOL

-dnl for solaris 
+dnl for solaris
 CPPFLAGS="${CPPFLAGS} -D_REENTRANT -D__EXTENSIONS__"

 # Checks for header files.
@ -90,7 +90,7 @@ AC_ARG_WITH(mysql,
    [WITH_MYSQL=$withval],[WITH_MYSQL=no])

 if test "$WITH_MYSQL" != "no"; then
-  AC_MSG_RESULT(yes)  
+  AC_MSG_RESULT(yes)
  if test "$WITH_MYSQL" = "yes"; then
    AC_PATH_PROG(MYSQL_CONFIG, mysql_config)
  else
@ -237,8 +237,8 @@ if test "x$use_openssl" = "xyes"; then

    AC_CHECK_HEADERS([openssl/ssl.h])
    OLDLIBS="$LIBS"
-    AC_CHECK_LIB(crypto, BIO_f_base64, [ 
-      AC_CHECK_LIB(ssl, SSL_new, [ SSL_LIB="-lssl -lcrypto" 
+    AC_CHECK_LIB(crypto, BIO_f_base64, [
+      AC_CHECK_LIB(ssl, SSL_new, [ SSL_LIB="-lssl -lcrypto"
 				 AC_DEFINE(HAVE_LIBSSL, [], [Have libssl]) ], [], [ -lcrypto "$DL_LIB" ])
    ], [], [])
    LIBS="$OLDLIBS"
@ -253,7 +253,7 @@ AC_MSG_RESULT([$WITH_PCRE])
 if test "x$cross_compiling" = xno -a "$WITH_PCRE" != "no"; then
  AC_PATH_PROG(PCRECONFIG, pcre-config)

-  if test x"$PCRECONFIG" != x; then 
+  if test x"$PCRECONFIG" != x; then
    PCRE_LIB=`$PCRECONFIG --libs`
    CPPFLAGS="$CPPFLAGS `$PCRECONFIG --cflags`"
    OLDLIBS="$LIBS"
@ -373,7 +373,7 @@ if test "$WITH_MEMCACHE" != "no"; then
 ])
 AC_SUBST(MEMCACHE_LIB)
 fi
-  
+
 dnl Check for lua
 AC_MSG_CHECKING(if lua-support is requested)
 AC_ARG_WITH(lua, AC_HELP_STRING([--with-lua],[lua engine for mod_cml]),
@ -455,13 +455,13 @@ if test "x$ac_cv_func_sendfile" = xyes; then
 		      int o = 0;
 		      if (-1 == sendfile(-1, 0, &o, 0) && errno == ENOSYS) return -1;
 		      return 0;
-		    } ], 
-		    AC_MSG_RESULT(yes), 
-		    [ AC_MSG_RESULT(no) 
+		    } ],
+		    AC_MSG_RESULT(yes),
+		    [ AC_MSG_RESULT(no)
 		    AC_DEFINE([HAVE_SENDFILE_BROKEN], [1], [broken sendfile]) ] )
 	else
-	      AC_MSG_RESULT(no, cross-compiling) 
-	      AC_DEFINE([HAVE_SENDFILE_BROKEN], [1], [broken sendfile]) 
+	      AC_MSG_RESULT(no, cross-compiling)
+	      AC_DEFINE([HAVE_SENDFILE_BROKEN], [1], [broken sendfile])
 	fi
 fi

@ -481,7 +481,7 @@ if test x$ipv6 = xtrue; then
 #include <sys/socket.h>
 #include <netinet/in.h>], [struct sockaddr_in6 s; struct in6_addr t=in6addr_any; int i=AF_INET6; s; t.s6_addr[0] = 0; ],
  [ac_cv_ipv6_support=yes], [ac_cv_ipv6_support=no])])
-  
+
  if test "$ac_cv_ipv6_support" = yes; then
    AC_DEFINE(HAVE_IPV6,1,[Whether to enable IPv6 support])
  fi
@ -507,7 +507,7 @@ fi

 dnl build version-id
 LIGHTTPD_VERSION_ID=`echo $PACKAGE_VERSION | $AWK -F '.' '{print "(" $1 " << 16 | " $2 " << 8 | " $3 ")"}'`
-AC_DEFINE_UNQUOTED([LIGHTTPD_VERSION_ID], [$LIGHTTPD_VERSION_ID], [lighttpd-version-id]) 
+AC_DEFINE_UNQUOTED([LIGHTTPD_VERSION_ID], [$LIGHTTPD_VERSION_ID], [lighttpd-version-id])

 AC_CONFIG_FILES([Makefile src/Makefile doc/Makefile tests/Makefile \
 		 tests/docroot/Makefile \
@ -521,7 +521,7 @@ AC_CONFIG_FILES([Makefile src/Makefile doc/Makefile tests/Makefile \
 AC_OUTPUT


-do_build="mod_cgi mod_fastcgi mod_proxy mod_evhost mod_simple_vhost mod_access mod_alias mod_setenv mod_usertrack mod_auth mod_status mod_accesslog mod_rrdtool mod_secdownload mod_expire mod_compress mod_dirlisting mod_indexfiles mod_userdir mod_webdav mod_staticfile mod_scgi mod_flv_streaming" 
+do_build="mod_cgi mod_fastcgi mod_proxy mod_evhost mod_simple_vhost mod_access mod_alias mod_setenv mod_usertrack mod_auth mod_status mod_accesslog mod_rrdtool mod_secdownload mod_expire mod_compress mod_dirlisting mod_indexfiles mod_userdir mod_webdav mod_staticfile mod_scgi mod_flv_streaming"

 plugins="mod_rewrite mod_redirect mod_ssi mod_trigger_b4_dl"
 features="regex-conditionals"
--- a/cygwin/lighttpd.README.in
+++ b/cygwin/lighttpd.README.in
@ -1,114 +1,114 @@
-lighttpd
------------------------------------------
-A fast, secure and flexible webserver
-
-Runtime requirements:
-  cygwin-1.5.10 or newer
-  crypt-1.1 or newer
-  libbz2_1-1.0.2 or newer
-  libpcre0-4.5 or newer
-  openssl-0.9.7d or newer
-  zlib-1.2.1 or newer
-
-Build requirements:
-  cygwin-1.5.10 or newer
-  gcc-3.3.1-3 or newer
-  binutils-20030901-1 or newer
-  crypt
-  openssl-devel
-  openssl
-  openldap
-  openldap-devel
-  zlib
-  bzip2
-
-Canonical homepage:
-  http://jan.kneschke.de/projects/lighttpd/
-
-Canonical download:
-  http://jan.kneschke.de/projects/lighttpd/download
-
------------------------------------
-
-Build instructions:
-  unpack lighttpd-@VERSION@-<REL>-src.tar.bz2
-    if you use setup to install this src package, it will be
-	 unpacked under /usr/src automatically
-  cd /usr/src
-  ./lighttpd-@VERSION@-<REL>.sh all
-
-This will create:
-  /usr/src/lighttpd-@VERSION@-<REL>.tar.bz2
-  /usr/src/lighttpd-@VERSION@-<REL>-src.tar.bz2
-
-Or use './lighttpd-@VERSION@-<REL>.sh prep' to get a patched source directory
-
-------------------------------------------
-
-Files included in the binary distribution:
-
-  /etc/lighttpd/lighttpd.conf.default
-  /usr/lib/cyglightcomp.dll
-  /usr/lib/lighttpd/mod_access.dll
-  /usr/lib/lighttpd/mod_accesslog.dll
-  /usr/lib/lighttpd/mod_auth.dll
-  /usr/lib/lighttpd/mod_cgi.dll
-  /usr/lib/lighttpd/mod_compress.dll
-  /usr/lib/lighttpd/mod_evhost.dll
-  /usr/lib/lighttpd/mod_expire.dll
-  /usr/lib/lighttpd/mod_fastcgi.dll
-  /usr/lib/lighttpd/mod_httptls.dll
-  /usr/lib/lighttpd/mod_maps.dll
-  /usr/lib/lighttpd/mod_proxy.dll
-  /usr/lib/lighttpd/mod_redirect.dll
-  /usr/lib/lighttpd/mod_rewrite.dll
-  /usr/lib/lighttpd/mod_rrdtool.dll
-  /usr/lib/lighttpd/mod_secdownload.dll
-  /usr/lib/lighttpd/mod_simple_vhost.dll
-  /usr/lib/lighttpd/mod_ssi.dll
-  /usr/lib/lighttpd/mod_status.dll
-  /usr/lib/lighttpd/mod_usertrack.dll
-  /usr/sbin/lighttpd.exe
-  /usr/share/doc/Cygwin/lighttpd-1.3.0.README
-  /usr/share/doc/lighttpd-1.3.0/accesslog.txt
-  /usr/share/doc/lighttpd-1.3.0/authentification.txt
-  /usr/share/doc/lighttpd-1.3.0/AUTHORS
-  /usr/share/doc/lighttpd-1.3.0/cgi.txt
-  /usr/share/doc/lighttpd-1.3.0/ChangeLog
-  /usr/share/doc/lighttpd-1.3.0/compress.txt
-  /usr/share/doc/lighttpd-1.3.0/configuration.txt
-  /usr/share/doc/lighttpd-1.3.0/COPYING
-  /usr/share/doc/lighttpd-1.3.0/fastcgi-state.txt
-  /usr/share/doc/lighttpd-1.3.0/fastcgi.txt
-  /usr/share/doc/lighttpd-1.3.0/features.txt
-  /usr/share/doc/lighttpd-1.3.0/INSTALL
-  /usr/share/doc/lighttpd-1.3.0/NEWS
-  /usr/share/doc/lighttpd-1.3.0/performance.txt
-  /usr/share/doc/lighttpd-1.3.0/plugins.txt
-  /usr/share/doc/lighttpd-1.3.0/proxy.txt
-  /usr/share/doc/lighttpd-1.3.0/README
-  /usr/share/doc/lighttpd-1.3.0/redirect.txt
-  /usr/share/doc/lighttpd-1.3.0/rewrite.txt
-  /usr/share/doc/lighttpd-1.3.0/rrdtool.txt
-  /usr/share/doc/lighttpd-1.3.0/secdownload.txt
-  /usr/share/doc/lighttpd-1.3.0/security.txt
-  /usr/share/doc/lighttpd-1.3.0/simple-vhost.txt
-  /usr/share/doc/lighttpd-1.3.0/skeleton.txt
-  /usr/share/doc/lighttpd-1.3.0/ssi.txt
-  /usr/share/doc/lighttpd-1.3.0/state.txt
-  /usr/share/man/man1/lighttpd.1.gz
-
------------------
-
-Port Notes:
-
----------  lighttpd-1.3.1-1 -----------
-
-Updated to 1.3.1
-
----------  lighttpd-1.3.0-1 -----------
-Initial release
-
-Cygwin port maintained by: Jan Kneschke <jan@kneschke.de>
-Please address all questions to the Cygwin mailing list at <cygwin@cygwin.com>
-
+lighttpd
+------------------------------------------
+A fast, secure and flexible webserver
+
+Runtime requirements:
+  cygwin-1.5.10 or newer
+  crypt-1.1 or newer
+  libbz2_1-1.0.2 or newer
+  libpcre0-4.5 or newer
+  openssl-0.9.7d or newer
+  zlib-1.2.1 or newer
+
+Build requirements:
+  cygwin-1.5.10 or newer
+  gcc-3.3.1-3 or newer
+  binutils-20030901-1 or newer
+  crypt
+  openssl-devel
+  openssl
+  openldap
+  openldap-devel
+  zlib
+  bzip2
+
+Canonical homepage:
+  http://jan.kneschke.de/projects/lighttpd/
+
+Canonical download:
+  http://jan.kneschke.de/projects/lighttpd/download
+
+------------------------------------
+
+Build instructions:
+  unpack lighttpd-@VERSION@-<REL>-src.tar.bz2
+    if you use setup to install this src package, it will be
+	 unpacked under /usr/src automatically
+  cd /usr/src
+  ./lighttpd-@VERSION@-<REL>.sh all
+
+This will create:
+  /usr/src/lighttpd-@VERSION@-<REL>.tar.bz2
+  /usr/src/lighttpd-@VERSION@-<REL>-src.tar.bz2
+
+Or use './lighttpd-@VERSION@-<REL>.sh prep' to get a patched source directory
+
+-------------------------------------------
+
+Files included in the binary distribution:
+
+  /etc/lighttpd/lighttpd.conf.default
+  /usr/lib/cyglightcomp.dll
+  /usr/lib/lighttpd/mod_access.dll
+  /usr/lib/lighttpd/mod_accesslog.dll
+  /usr/lib/lighttpd/mod_auth.dll
+  /usr/lib/lighttpd/mod_cgi.dll
+  /usr/lib/lighttpd/mod_compress.dll
+  /usr/lib/lighttpd/mod_evhost.dll
+  /usr/lib/lighttpd/mod_expire.dll
+  /usr/lib/lighttpd/mod_fastcgi.dll
+  /usr/lib/lighttpd/mod_httptls.dll
+  /usr/lib/lighttpd/mod_maps.dll
+  /usr/lib/lighttpd/mod_proxy.dll
+  /usr/lib/lighttpd/mod_redirect.dll
+  /usr/lib/lighttpd/mod_rewrite.dll
+  /usr/lib/lighttpd/mod_rrdtool.dll
+  /usr/lib/lighttpd/mod_secdownload.dll
+  /usr/lib/lighttpd/mod_simple_vhost.dll
+  /usr/lib/lighttpd/mod_ssi.dll
+  /usr/lib/lighttpd/mod_status.dll
+  /usr/lib/lighttpd/mod_usertrack.dll
+  /usr/sbin/lighttpd.exe
+  /usr/share/doc/Cygwin/lighttpd-1.3.0.README
+  /usr/share/doc/lighttpd-1.3.0/accesslog.txt
+  /usr/share/doc/lighttpd-1.3.0/authentification.txt
+  /usr/share/doc/lighttpd-1.3.0/AUTHORS
+  /usr/share/doc/lighttpd-1.3.0/cgi.txt
+  /usr/share/doc/lighttpd-1.3.0/ChangeLog
+  /usr/share/doc/lighttpd-1.3.0/compress.txt
+  /usr/share/doc/lighttpd-1.3.0/configuration.txt
+  /usr/share/doc/lighttpd-1.3.0/COPYING
+  /usr/share/doc/lighttpd-1.3.0/fastcgi-state.txt
+  /usr/share/doc/lighttpd-1.3.0/fastcgi.txt
+  /usr/share/doc/lighttpd-1.3.0/features.txt
+  /usr/share/doc/lighttpd-1.3.0/INSTALL
+  /usr/share/doc/lighttpd-1.3.0/NEWS
+  /usr/share/doc/lighttpd-1.3.0/performance.txt
+  /usr/share/doc/lighttpd-1.3.0/plugins.txt
+  /usr/share/doc/lighttpd-1.3.0/proxy.txt
+  /usr/share/doc/lighttpd-1.3.0/README
+  /usr/share/doc/lighttpd-1.3.0/redirect.txt
+  /usr/share/doc/lighttpd-1.3.0/rewrite.txt
+  /usr/share/doc/lighttpd-1.3.0/rrdtool.txt
+  /usr/share/doc/lighttpd-1.3.0/secdownload.txt
+  /usr/share/doc/lighttpd-1.3.0/security.txt
+  /usr/share/doc/lighttpd-1.3.0/simple-vhost.txt
+  /usr/share/doc/lighttpd-1.3.0/skeleton.txt
+  /usr/share/doc/lighttpd-1.3.0/ssi.txt
+  /usr/share/doc/lighttpd-1.3.0/state.txt
+  /usr/share/man/man1/lighttpd.1.gz
+
+------------------
+
+Port Notes:
+
+----------  lighttpd-1.3.1-1 -----------
+
+Updated to 1.3.1
+
+----------  lighttpd-1.3.0-1 -----------
+Initial release
+
+Cygwin port maintained by: Jan Kneschke <jan@kneschke.de>
+Please address all questions to the Cygwin mailing list at <cygwin@cygwin.com>
+
--- a/debian/Makefile.am
+++ b/debian/Makefile.am
@ -24,4 +24,4 @@ postrm.ex \
 preinst.ex \
 prerm.ex \
 rules \
-watch.ex 
+watch.ex
--- a/debian/control
+++ b/debian/control
@ -12,4 +12,4 @@ Provides: httpd, httpd-cgi
 Suggests: openssl, rrdtool
 Description:  A fast webserver with minimal memory footprint
 lighttpd is intended to be a frontend for ad-servers which have to deliver
- small files concurrently to many connections. 
+ small files concurrently to many connections.
--- a/debian/copyright
+++ b/debian/copyright
@ -24,15 +24,15 @@ modification, are permitted provided that the following conditions are met:
  be used to endorse or promote products derived from this software without
  specific prior written permission.

-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 THE POSSIBILITY OF SUCH DAMAGE.

--- a/debian/emacsen-install.ex
+++ b/debian/emacsen-install.ex
@ -23,7 +23,7 @@ FLAGS="${SITEFLAG} -q -batch -l path.el -f batch-byte-compile"
 ELDIR=/usr/share/emacs/site-lisp/${PACKAGE}
 ELCDIR=/usr/share/${FLAVOR}/site-lisp/${PACKAGE}

-# Install-info-altdir does not actually exist. 
+# Install-info-altdir does not actually exist.
 # Maybe somebody will write it.
 if test -x /usr/sbin/install-info-altdir; then
    echo install/${PACKAGE}: install Info links for ${FLAVOR}
--- a/debian/init.d
+++ b/debian/init.d
@ -4,7 +4,7 @@
 #		This file should be used to construct scripts for /etc/init.d.
 #
 #		Written by Miquel van Smoorenburg <miquels@cistron.nl>.
-#		Modified for Debian 
+#		Modified for Debian
 #		by Ian Murdock <imurdock@gnu.ai.mit.edu>.
 #
 # Version:	@(#)skeleton  1.9  26-Feb-2001  miquels@cistron.nl
--- a/debian/lighttpd.conf
+++ b/debian/lighttpd.conf
@ -1,5 +1,5 @@
 # lighttpd configuration file
-# 
+#
 # use a it as base for lighttpd 1.0.0 and above
 #
 # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
@ -11,12 +11,12 @@
 # all other module should only be loaded if really neccesary
 # - saves some time
 # - saves memory
-server.modules              = ( 
-#                               "mod_rewrite", 
-#                               "mod_redirect", 
-			        "mod_access", 
-#				"mod_auth", 
-#                               "mod_status", 
+server.modules              = (
+#                               "mod_rewrite",
+#                               "mod_redirect",
+			        "mod_access",
+#				"mod_auth",
+#                               "mod_status",
 #				"mod_fastcgi",
 #				"mod_simple_vhost",
 #				"mod_evhost",
@ -27,7 +27,7 @@ server.modules              = (
 # 				"mod_rrdtool",
 				"mod_accesslog" )

-## a static document-root, for virtual-hosting take look at the 
+## a static document-root, for virtual-hosting take look at the
 ## server.virtual-* options
 server.document-root             = "/var/www/"

@ -35,11 +35,11 @@ server.document-root             = "/var/www/"
 server.errorlog            = "/var/log/lighttpd/error.log"

 # files to check for if .../ is requested
-server.indexfiles          = ( "index.php", "index.html", 
+server.indexfiles          = ( "index.php", "index.html",
                                "index.htm", "default.htm" )

 # mimetype mapping
-mimetype.assign            = (  
+mimetype.assign            = (
  ".pdf"          =>      "application/pdf",
  ".sig"          =>      "application/pgp-signature",
  ".spl"          =>      "application/futuresplash",
@ -133,7 +133,7 @@ server.pid-file              = "/var/run/lighttpd.pid"
 #simple-vhost.document-root       = "/pages/"


-## 
+##
 ## Format: <errorfile-prefix><status>.html
 ## -> ..../status-404.html for 'File not found'
 #server.errorfile-prefix    = "/home/weigon/projects/lighttpd/doc/status-"
@ -162,8 +162,8 @@ server.groupname           = "www-data"
 #### fastcgi module
 ## read fastcgi.txt for more info
 #fastcgi.server              = ( ".php" =>
-#				( "localhost" => 
-#				  ( 
+#				( "localhost" =>
+#				  (
 #				    "socket" => "/tmp/php-fastcgi.socket",
 #				    "bin-path" => "/usr/local/bin/php"
 #				  )
@ -192,14 +192,14 @@ server.groupname           = "www-data"
 # auth.backend.ldap.base-dn  = "dc=my-domain,dc=com"
 # auth.backend.ldap.filter   = "(uid=$)"

-# auth.require                = ( "/server-status" => 
-#                                ( 
+# auth.require                = ( "/server-status" =>
+#                                (
 #				  "method"  => "digest",
 #				  "realm"   => "download archiv",
 #				  "require" => "group=www|user=jan|host=192.168.2.10"
 #				),
-#				"/server-info" => 
-#                                ( 
+#				"/server-info" =>
+#                                (
 #				  "method"  => "digest",
 #				  "realm"   => "download archiv",
 #				  "require" => "group=www|user=jan|host=192.168.2.10"
--- a/debian/lighttpd.doc-base.EX
+++ b/debian/lighttpd.doc-base.EX
@ -19,4 +19,4 @@ Format: HTML
 Index: /usr/share/doc/lighttpd/html/index.html
 Files: /usr/share/doc/lighttpd/html/*.html

-  
+
--- a/debian/manpage.1.ex
+++ b/debian/manpage.1.ex
@ -34,7 +34,7 @@ because the original program does not have a manual page.
 Instead, it has documentation in the GNU Info format; see below.
 .PP
 .\" TeX users may be more comfortable with the \fB<whatever>\fP and
-.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
 .\" respectively.
 \fBlighttpd\fP is a program that...
 .SH OPTIONS
--- a/debian/manpage.sgml.ex
+++ b/debian/manpage.sgml.ex
@ -8,7 +8,7 @@
 manpage.1: manpage.sgml
 	docbook-to-man $< > $@

-    
+
 	The docbook-to-man binary is found in the docbook-to-man package.
 	Please remember that if you create the nroff version in one of the
 	debian/rules file targets (such as build), you will need to include
@ -125,7 +125,7 @@ manpage.1: manpage.sgml
    <para>This manual page was written by &dhusername; &dhemail; for
      the &debian; system (but may be used by others).  Permission is
      granted to copy, distribute and/or modify this document under
-      the terms of the &gnu; General Public License, Version 2 any 
+      the terms of the &gnu; General Public License, Version 2 any
 	  later version published by the Free Software Foundation.
    </para>
 	<para>
--- a/debian/manpage.xml.ex
+++ b/debian/manpage.xml.ex
@ -17,7 +17,7 @@ XP=xsltproc -''-nonet

 manpage.1: manpage.dbk
        $(XP) $(DB2MAN) $<
-    
+
 The xsltproc binary is found in the xsltproc package.  The
 XSL files are in docbook-xsl.  Please remember that if you
 create the nroff version in one of the debian/rules file
@ -135,7 +135,7 @@ and docbook-xsl in your Build-Depends control field.
    <para>This manual page was written by &dhusername; &dhemail; for
      the &debian; system (but may be used by others).  Permission is
      granted to copy, distribute and/or modify this document under
-      the terms of the &gnu; General Public License, Version 2 any 
+      the terms of the &gnu; General Public License, Version 2 any
 	  later version published by the Free Software Foundation.
    </para>
 	<para>
--- a/debian/rules
+++ b/debian/rules
@ -52,7 +52,7 @@ build-stamp:  config.status
 clean:
 	dh_testdir
 	dh_testroot
-	rm -f build-stamp 
+	rm -f build-stamp

 	# Add here commands to clean up after the build process.
 	-$(MAKE) distclean
@ -64,12 +64,12 @@ ifneq "$(wildcard /usr/share/misc/config.guess)" ""
 endif


-	dh_clean 
+	dh_clean

 install: build
 	dh_testdir
 	dh_testroot
-	dh_clean -k 
+	dh_clean -k
 	dh_installdirs

 	# Add here commands to install the package into debian/lighttpd.
@ -91,7 +91,7 @@ binary-arch: build install
 	dh_installexamples
 #	dh_install
 #	dh_installmenu
-#	dh_installdebconf	
+#	dh_installdebconf
 	dh_installlogrotate
 #	dh_installemacsen
 #	dh_installpam
@ -114,4 +114,4 @@ binary-arch: build install
 	dh_builddeb

 binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install 
+.PHONY: build clean binary-indep binary-arch binary install
--- a/distribute.sh.in
+++ b/distribute.sh.in
@ -3,7 +3,7 @@ PACKAGE=@PACKAGE_TARNAME@
 VERSION=@VERSION@
 NAME=@PACKAGE_TARNAME@-@VERSION@

-DISTDIR="/home/jan/wwwroot/servers/www.lighttpd.net/pages/download/" 
+DISTDIR="/home/jan/wwwroot/servers/www.lighttpd.net/pages/download/"
 RPMS="/home/jan/rpmbuild/RPMS/i386/${NAME}-1.i386.rpm \
 	/home/jan/rpmbuild/SRPMS/${NAME}-1.src.rpm"
 FILES="${RPMS}	${NAME}.tar.gz \
@ -21,7 +21,7 @@ esac
 echo ${nopack}

 if test x${pack} = x1; then
-	make distcheck && rpmbuild -ta --nodeps ${NAME}.tar.gz 
+	make distcheck && rpmbuild -ta --nodeps ${NAME}.tar.gz
 	gpg --detach-sign ${NAME}.tar.gz
 	rpm --addsign ${RPMS}
 fi
@ -49,7 +49,7 @@ Download
  MD5: ${MD5SRPM}
 - ${NAME}.tar.gz
  ${DLNAME}.tar.gz
-  MD5: ${MD5TGZ} 
+  MD5: ${MD5TGZ}
  Signature: ${DLNAME}.tar.gz.sig

 EOF
@ -67,7 +67,7 @@ Checksums
 - ${NAME}-1.src.rpm
  MD5: ${MD5SRPM}
 - ${NAME}.tar.gz
-  MD5: ${MD5TGZ} 
+  MD5: ${MD5TGZ}

 EOF

--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@ -81,7 +81,7 @@ EXTRA_DIST=lighttpd.conf lighttpd.user \
 	newstyle.css \
 	oldstyle.css \
 	$(DOCS)
- 
+
 %.html: %.txt
 	rst2html $^ > $@

@ -90,11 +90,11 @@ html: $(HTMLDOCS)

 #%.ps.gz: %.ps
 #	gzip $^
-	
+
 #%.ps: %.dot
-#	dot -Tps -o $@ $^   
+#	dot -Tps -o $@ $^

 clean-local:
 	rm -f *.html

-	
+
--- a/doc/access.txt
+++ b/doc/access.txt
@ -12,10 +12,10 @@ Module: mod_access

 :abstract:
  The access module is used to deny access to files with given trailing path names.
- 
+
 .. meta::
  :keywords: lighttpd, trailing path access control
-  
+
 .. contents:: Table of Contents

 Description
@ -32,7 +32,7 @@ url.access-deny
  Default: empty

  Example: ::
-    
+
    url.access-deny = ( "~", ".inc")

  will deny access to all files ended with a diacritical mark (~) or .inc
--- a/doc/accesslog.txt
+++ b/doc/accesslog.txt
@ -11,11 +11,11 @@ Module: mod_accesslog
 :Revision: $Revision: 1.2 $

 :abstract:
-  The accesslog module ... 
-  
+  The accesslog module ...
+
 .. meta::
  :keywords: lighttpd, accesslog, CLF
-  
+
 .. contents:: Table of Contents

 Description
@ -28,30 +28,30 @@ Options

 accesslog.use-syslog
  send the accesslog to syslog
-  
+
  Default: disabled

 accesslog.filename
  name of the file where the accesslog should be written too if syslog
  is not used.
-  
+
  if the name starts with a '|' the rest of the name is taken
  as the name of a process which will be spawn and will get the
  output
-  
+
  e.g.: ::
-  
+
    accesslog.filename = "/var/log/lighttpd.log"
-    
+
    $HTTP["host"] == "mail.example.org" {
      accesslog.filename = "|/usr/bin/cronolog"
    }
-    
+
  Default: disabled

 accesslog.format
  the format of the logfile
-  
+
  ====== ================================
  Option Description
  ====== ================================
@ -60,8 +60,8 @@ accesslog.format
  %l     ident name (not supported)
  %u     authenticated user
  %t     timestamp for the request-start
-  %r     request-line 
-  %s     status code 
+  %r     request-line
+  %s     status code
  %b     bytes sent for the body
  %i     HTTP-header field
  %a     remote address
@ -86,16 +86,16 @@ accesslog.format
  %I     bytes incomming
  %O     bytes outgoing
  ====== ================================
-  
+
  If %s is written %>s or %<s the < and the > are ignored. They are support
-  for compat with apache. 
-  
+  for compat with apache.
+
  %i and %o expect the name of the field which should be written in curly brackets.
-  
+
  e.g.: ::
-  
+
    accesslog.format = "%h %l %u %t \"%r\" %b %>s \"%{User-Agent}i\" \"%{Referer}i\""
-  
+
  Default: CLF compatible output

 Response Header
@ -109,18 +109,18 @@ If you want to log it into the accesslog just specify the field-name within
 a %{...}o like ::

  accesslog.format = "%h %l %u %t \"%r\" %b %>s \"%{User-Agent}i\" \"%{Referer}i\" \"%{X-LIGHTTPD-SID}o\""
-  
+
 The prefix ``X-LIGHTTPD-`` is special as every response header starting with
 this prefix is assumed to be special for lighttpd and won't be sent out
-to the client. 
+to the client.

 An example the use this functionality is provided below: ::

  <?php
-  
+
  session_start();
-  
+
  header("X-LIGHTTPD-SID: ".session_id());
-  
+
  ?>

--- a/doc/alias.txt
+++ b/doc/alias.txt
@ -11,11 +11,11 @@ Module: mod_alias
 :Revision: $Revision: 1.1 $

 :abstract:
-  The alias module ... 
-  
+  The alias module ...
+
 .. meta::
  :keywords: lighttpd, alias
-  
+
 .. contents:: Table of Contents

 Description
@ -32,5 +32,5 @@ alias.url
  Default: empty

  Example: ::
-    
+
    alias.url = ( "/cgi-bin/" => "/var/www/servers/www.example.org/cgi-bin/" )
--- a/doc/authentication.txt
+++ b/doc/authentication.txt
@ -12,10 +12,10 @@ Module: mod_auth

 :abstract:
  The auth module provides ...
-  
+
 .. meta::
  :keywords: lighttpd, authentication
-  
+
 .. contents:: Table of Contents

 Description
@ -24,85 +24,85 @@ Description
 Supported Methods
 -----------------

-lighttpd supportes both authentication method described by 
-RFC 2617: 
+lighttpd supportes both authentication method described by
+RFC 2617:

 basic
 `````

-The Basic method transfers the username and the password in 
-cleartext over the network (base64 encoded) and might result 
-in security problems if not used in conjunction with a crypted 
+The Basic method transfers the username and the password in
+cleartext over the network (base64 encoded) and might result
+in security problems if not used in conjunction with a crypted
 channel between client and server.

 digest
 ``````

-The Digest method only transfers a hashed value over the 
-network which performs a lot of work to harden the 
+The Digest method only transfers a hashed value over the
+network which performs a lot of work to harden the
 authentication process in insecure networks.

 Backends
 --------

-Depending on the method lighttpd provides various way to store 
+Depending on the method lighttpd provides various way to store
 the credentials used for the authentication.

 for basic auth:

 - plain_
- htpasswd_ 
+- htpasswd_
 - htdigest_
 - ldap_
-  
+
 for digest auth:

 - plain_
 - htdigest_
-  
+

 plain
 `````

-A file which contains username and the cleartext password 
-seperated by a colon. Each entry is terminated by a single 
+A file which contains username and the cleartext password
+seperated by a colon. Each entry is terminated by a single
 newline.::

  e.g.:
  agent007:secret
-  
+

 htpasswd
 ````````

-A file which contains username and the crypt()'ed password 
-seperated by a colon. Each entry is terminated by a single 
+A file which contains username and the crypt()'ed password
+seperated by a colon. Each entry is terminated by a single
 newline. ::

  e.g.:
  agent007:XWY5JwrAVBXsQ

-You can use htpasswd from the apache distribution to manage 
+You can use htpasswd from the apache distribution to manage
 those files. ::
-  
+
  $ htpasswd lighttpd.user.htpasswd agent007
-  
-  
+
+
 htdigest
 ````````

-A file which contains username, realm and the md5()'ed 
-password seperated by a colon. Each entry is terminated 
+A file which contains username, realm and the md5()'ed
+password seperated by a colon. Each entry is terminated
 by a single newline. ::
-  
+
  e.g.:
  agent007:download area:8364d0044ef57b3defcfa141e8f77b65
-  
-You can use htdigest from the apache distribution to manage 
+
+You can use htdigest from the apache distribution to manage
 those files. ::

  $ htdigest lighttpd.user.htdigest 'download area' agent007
-  
+
 Using md5sum can also generate the password-hash: ::

  #!/bin/sh
@ -118,21 +118,21 @@ To use it:

  $ htdigest.sh 'agent007' 'download area' 'secret'
  agent007:download area:8364d0044ef57b3defcfa141e8f77b65
-  
-  
-  
+
+
+
 ldap
 ````

-the ldap backend is basically performing the following steps 
+the ldap backend is basically performing the following steps
 to authenticate a user
-  
+
 1. connect anonymously  (at plugin init)
 2. get DN for filter = username
 3. auth against ldap server
 4. disconnect
-   
-if all 4 steps are performed without any error the user is 
+
+if all 4 steps are performed without any error the user is
 authenticated

 Configuration
@ -143,28 +143,28 @@ Configuration
  ## debugging
  # 0 for off, 1 for 'auth-ok' messages, 2 for verbose debugging
  auth.debug                 = 0
-  
-  ## type of backend 
+
+  ## type of backend
  # plain, htpasswd, ldap or htdigest
  auth.backend               = "htpasswd"

-  # filename of the password storage for 
+  # filename of the password storage for
  # plain
  auth.backend.plain.userfile = "lighttpd-plain.user"
-  
+
  ## for htpasswd
  auth.backend.htpasswd.userfile = "lighttpd-htpasswd.user"
-  
+
  ## for htdigest
  auth.backend.htdigest.userfile = "lighttpd-htdigest.user"

  ## for ldap
-  # the $ in auth.backend.ldap.filter is replaced by the 
+  # the $ in auth.backend.ldap.filter is replaced by the
  # 'username' from the login dialog
  auth.backend.ldap.hostname = "localhost"
  auth.backend.ldap.base-dn  = "dc=my-domain,dc=com"
  auth.backend.ldap.filter   = "(uid=$)"
-  # if enabled, startTLS needs a valid (base64-encoded) CA 
+  # if enabled, startTLS needs a valid (base64-encoded) CA
  # certificate
  auth.backend.ldap.starttls   = "enable"
  auth.backend.ldap.ca-file   = "/etc/CAcertificate.pem"
@ -178,20 +178,20 @@ Configuration
  #     "require" => "user=<username>" )
  # )
  #